8-channel remote control receiver signal conversion / PWM / PPM / SBUS / DBUS / S-BUS / D-BUS / Pixhawk
8-channel remote control receiver signal conversion module using 32-bit MCU to collect signals and conversion, the input signal automatically identified, without manual switching.
1, enter the normal receiver signal, output PPM and S.BUS signal
2, enter the PPM signal, output PWM and S.BUS signal
3, enter the S.BUS signal, output PWM and PPM signal
With this signal converter, you can put the DJI wizard in the ordinary remote control receiver and remote control, and not necessarily have to use DJI original remote control (the ordinary remote control PWM signal into the wizard with the SBUS signal).
With this signal converter, you can use the DJI Wizard's remote control on an ordinary plane (the wizard's remote control receiver's SBUS signal is converted to a normal PWM signal for ordinary ESC and steering gear)
With this signal converter, you can convert the PPM signal (coaching interface) of a normal remote control to a PWM signal (equivalent to a wired receiver, converted to a normal PWM signal for use with a normal ESC and steering gear)
1-8 channel for the PWM signal input or output channel;
9th channel is PPM, SBUS input or PPM output channel;
Channel 10 is the output channel for PPM or SBUS.
The input signal is automatically recognized without manual switching.
1. When the PWM signal is input to any one or several channels in the 1 - 8 channel, the 9 channel will output the PPM signal and the 10 channel will output the SBUS signal (the indicator will flash 1)
2. When 9-channel input PPM signal, 1 - 8 channel will output PWM signal, 10 channel will output SBUS signal (indicator light flash 2)
3. When the 9-channel input SBUS signal, 1 - 8 channel will output PWM signal, 10 channel will output PPM signal (indicator light flash 3)
8-channel remote control receiver signal conversion × 1 (26 × 24MM)
This product was added to our catalog on Sunday 23 July, 2017.